Using changer input as aux on Panasonic

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39432
Printed Date: July 17, 2025 at 8:04 PM

Topic: Using changer input as aux on Panasonic

Posted By: cornflake
Subject: Using changer input as aux on Panasonic
Date Posted: September 20, 2004 at 5:02 PM

I have a Panasonic DF600U Head unit. I want to use the CD input as an AUX input for my DVD system instead of the horrible FM Modulator that I have. Is there any way, (other than to buy an old changer and not plug in the RCA inputs) to fool the deck into thinking the changer is plugged in so I can use the RCA inputs from the changer? The deck won't allow me to accesss that input unless the changer is plugged in. If that's the only way, I'll have to check E-Bay, but if anyone knows the wiring of the changer cable, and could figure out a way to do this I would greatly appreciate it!!!

Thanks!

Replies:

Posted By: Jay T
Date Posted: September 20, 2004 at 10:57 PM

Try www.logjamelectronics.com they have a large selection of the adaptors you are looking for. One end goes into the cd changer input on the rear of the deck. The other end of the adaptor is RCA inputs. Real Nice. No FM mod.

Posted By: cornflake
Date Posted: September 21, 2004 at 7:13 AM

Yup, those are what I'm looking for, but no-one makes one for Panasonic that I've been able to find. Anybody know if Panasonic uses someone elses CHANGER protocol so that another brand of these would work?

Posted By: Jay T
Date Posted: September 21, 2004 at 5:04 PM

I may be wrong but isn't JVC the same as Panasonic?