Sirus install 04 maxima

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39617
Printed Date: May 10, 2025 at 10:03 AM

Topic: Sirus install 04 maxima

Posted By: lions7199
Subject: Sirus install 04 maxima
Date Posted: September 23, 2004 at 11:10 AM

2004 maxima with standard factory head unit.Factory Unit has SAT button already (NO SAT message currenlty appears when button is pressed)Need to know if a Sirius Reciever (SIR-CL1) & antenna is all i need to integrate SAT radio into my factory unit.also does anyone have a manual or diagram of the 04 max's factory head unit. I was told that clarion makesthe unit but i can't seem to find any documentation on it.

ANY IDEA FELLAS?????

Replies:

Posted By: lions7199
Date Posted: September 23, 2004 at 6:33 PM

here is the link to the sirius reciever that i am talking about.

https://www.crutchfield.com/S-hBAwmcT7QTp/cgi-bin/ProdView.asp?s=0&c=18&g=176850&I=020SIRCL1&o=p&a=1&cc=01&avf=Y&search=

thanks

Posted By: customsuburb
Date Posted: September 24, 2004 at 4:16 PM

That sirius tuner can not be used with the factory head unit. It's for aftermarket Clarion head units only.

-------------

Posted By: DanDan
Date Posted: September 24, 2004 at 5:13 PM

You can purchase the factory unit for that car as an accessory. I installed one last week for one of my dealers. The antenna mounts on the roof and you hide the wire inside the glass moulding. The module plugs right in under the trunk liner. It is plug and play. I believe Nissan uses XM. I don't remember when I put it in. The part is not too bad in price either and it is plug and play.

DanDan

Posted By: lions7199
Date Posted: September 28, 2004 at 12:31 PM

Do u guys know were if i can get just the wire harness to attach the xm tuner to the plug in the trunk?. the dealer wants $356.00 for the kit but i can ge the tuner and antenna for a little over $150.00. does anyone make a harness that will work?????

Print Page | Close Window