Remote sub control questions

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39818
Printed Date: September 18, 2025 at 8:22 PM

Topic: Remote sub control questions

Posted By: 2001blazer
Subject: Remote sub control questions
Date Posted: September 27, 2004 at 12:35 AM

I am looking to install a remote control knob for my subwoofers running off an Infinity Reference 1210a amp. The port for the reomte is an RJ type jack, similar to a phone plug. I have also seen these on some other brands. Are they universal, or do I need Infinity's specific control (Reference 100RC)? Second question; does anyone know the wiring info for such a knob? It has 4 wires, and I am wondering if I can just make my own out of parts from Radio Shack. Whether I make one or buy Infinity's, I would like to wire two knobs with a switch, so I can have one up at the dash and a second knob in the hatch of my truck by the subs. I would wire the switch in the back as well. Thanks!

Replies:

Posted By: jeffchilcott
Date Posted: September 27, 2004 at 5:57 PM

i have used knobs from other amps. havent had a poblem yet. but i dont know about all amps

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place

Posted By: Ravendarat
Date Posted: September 27, 2004 at 7:09 PM

That infinity amp can use outher controlers such as the previous generation of RF bass knobs.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer