Print Page | Close Window

Four 4 ohm dvc subs wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=39898
Printed Date: June 16, 2024 at 10:03 AM


Topic: Four 4 ohm dvc subs wiring

Posted By: ir8st8
Subject: Four 4 ohm dvc subs wiring
Date Posted: September 28, 2004 at 8:12 AM

i have 4 dvc subs

each coil is 4 ohms

i need either  all four toghther to equal 4 ohms

or 2 subs to equal 2 ohms

is this possible? please help! thanks



-------------
"thats red to negitive and black to postive....... right?"



Replies:

Posted By: Ravendarat
Date Posted: September 28, 2004 at 9:42 AM
Nope, you can get a pair of 4 ohm loads, one2 ohm load or a pair of 1 ohm loads Or I guess if you really want a 16 ohm load.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer



Posted By: DYohn
Date Posted: September 28, 2004 at 10:22 AM
Your best net load will end up either 8 ohms or 2 ohms.  (or you can wire for 0.5 ohms or even 32 ohms)  What kind of load will your amp handle?  What's the amp?

-------------
Support the12volt.com


Print Page | Close Window