Getting Speakers To 2 Ohms

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40058
Printed Date: July 06, 2025 at 7:41 PM

Topic: Getting Speakers To 2 Ohms

Posted By: newinstaller
Subject: Getting Speakers To 2 Ohms
Date Posted: September 30, 2004 at 2:35 PM

I would like to know when it says on a spec sheet 75W RMS x4 @ 4 Ohm Stereo and 125 RMS x 4 @ 2 Ohm stereo

If I am putting all my speakers on a amp how do I make them 2 Ohms to get the most power?

Thanks

Replies:

Posted By: DYohn
Date Posted: September 30, 2004 at 3:39 PM

It depends on the speaker. What are they?

-------------
Support the12volt.com

Posted By: dxav
Date Posted: September 30, 2004 at 3:44 PM

Each speaker has impedance (resistance, basically), or qualify as a load on a circuit. Using series/parallel computations, you can match a speaker to the load an amp needs to properly function.

The12volt.com help

DXAV

Print Page | Close Window