Mach460, New deck to stock

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40132
Printed Date: May 12, 2025 at 4:59 PM

Topic: Mach460, New deck to stock

Posted By: EluminusSVT
Subject: Mach460, New deck to stock
Date Posted: October 01, 2004 at 9:17 PM

Ok, I tried posting before about my speakers popping when I turn on the car. (I have a Aiwa CDC-X227 head unit and was installing it with a Schocshe harness and Scosche Speaker Line Converter.)

After connecting everything (the right way, I've done this a million times before), I come to find out that the Cobra's wondeful Mach 460 system is a b**** to work on. Anyways, someone in that post said that it may be my speaker line converter and to just hook up the Aiwa head unit with the wiring harness straight to the car.

Will...this...work...? Anyone? Thanks for the help everybody!

Replies:

Posted By: rallysport
Date Posted: October 01, 2004 at 9:28 PM

ditch the lineout coverter and plug the rcas straight into the deck.

-------------

Posted By: EluminusSVT
Date Posted: October 01, 2004 at 9:52 PM

Huh? What RCA's? There are none. I am installing an aftermarket deck with a wiring harness to the stock wiring harness. I am sorry, I am probably just missunderstanding but there are no RCA/s immediately coming to the deck. There will be RCA's, but they're going out to my Sony Amp and Xplod subs after this is installed. Right now I'm just putting in the the deck.Thank you very much for your help.

Posted By: rallysport
Date Posted: October 01, 2004 at 10:10 PM

youve got me good and confused :)

-------------