Print Page | Close Window

Dynaudio 360 polarity

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40150
Printed Date: October 31, 2024 at 6:16 PM


Topic: Dynaudio 360 polarity

Posted By: 2ndiinone
Subject: Dynaudio 360 polarity
Date Posted: October 02, 2004 at 1:43 AM

I purchased the 3 way Dynaudio 360 set. There are no markings to which side is the positive or which side is the negative on any of the 3 speakers. There is also nothing in writing or instructions that tell this either. The only assumption I believe I can make is that the positive side is the right side of the speaker. Also I am assuming it is the right side of the speaker because there is a sticker there. The shop I bought them from is out of business so they are no help.  Any help or tips is greatly appreciated.



Replies:

Posted By: 2ndiinone
Date Posted: October 02, 2004 at 1:44 AM
Also both connections are the exact same size on all the speakers.




Posted By: Lizardking
Date Posted: October 02, 2004 at 2:14 AM
Use a 9volt battery...If the woofer pushes out that's positive. If the woofer pulls inwards that's negative...




Posted By: russ lund
Date Posted: October 02, 2004 at 10:56 AM
Alright lizard king.You have stolen my Idea I've been using for 18-19 years.

-------------
BigDog




Posted By: 2ndiinone
Date Posted: October 02, 2004 at 11:17 AM

Wow thats easy for a mid or woofer, how do I do this with a  tweeter?





Posted By: DYohn
Date Posted: October 02, 2004 at 12:43 PM
Your initial assumption is correct.  If there is a sticker near the terminal on one side and it is consistent on all the drivers, that is the + side.

-------------
Support the12volt.com





Print Page | Close Window