Print Page | Close Window

Infinity Amp, Incorrect Instructions

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40464
Printed Date: December 19, 2025 at 8:39 AM


Topic: Infinity Amp, Incorrect Instructions

Posted By: gibraltar_lude
Subject: Infinity Amp, Incorrect Instructions
Date Posted: October 07, 2004 at 1:10 PM

Hey, i have bought an infinity 5760a 6 channel amp. I currently am only running my rear speakers on it until u get my sub, and i have connected the speakers normally, not bridged.

Now i ahve connected my speakers on the middle column where it says "rear" , odd thing is that on the instruction manual as can be seen on the picture below, both left speakers are connected on the front and both right speakers on  the rear inputs? How can this be. I am at a loss. And currently only my left speaker sounds with the tweeter and the right speaker sounds very low and the tweeter wont work. I need help, should i connect it as it says on the manual shown like on the picture below?? one left speaker on the front inputs and the right speaker on the rear inputs?

Thanks, i really need quick help on this.

posted_image




Replies:

Posted By: gibraltar_lude
Date Posted: October 07, 2004 at 1:35 PM

posted_image

pic of my boot





Posted By: jeffchilcott
Date Posted: October 07, 2004 at 4:17 PM
interesting pic in the manual, I would just wire fronts right and left to the front left right ect ect and see what happens     that is a odd manual

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place




Posted By: gibraltar_lude
Date Posted: October 07, 2004 at 4:20 PM
i have connected it the logical way, but the right speaker doesnt sound very loud, compared to the left, should i connect it as it says on the manual??




Posted By: jeffchilcott
Date Posted: October 07, 2004 at 4:27 PM
try it that way,   then check your wires at the speaker maybe thier lose

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place




Posted By: DYohn
Date Posted: October 07, 2004 at 5:23 PM
Looks like a typo in the manual to me.  Be sure you have set your input level properly.

-------------
Support the12volt.com





Print Page | Close Window