Eclipse SW9122
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41024
Printed Date: May 18, 2024 at 3:44 PM
Topic: Eclipse SW9122
Posted By: Lizardking
Subject: Eclipse SW9122
Date Posted: October 16, 2004 at 7:57 PM
Do these subs hit hard? What I mean about hard is if you listen to let's say Metallica will it be nice and tight sounding? Make you feel like someone is hitting you in the back of the head. I would be putting 1400watts RMS in a 1ohm load. Also what is the mounting depth of these subs?
Replies:
Posted By: jeffchilcott
Date Posted: October 16, 2004 at 8:24 PM
The mounting depth is failrly deep around 7 or 8 inches I believe. What amp are you going to use to power it? 1400rms is alot of power and it will handle it very well, the sound is incredibly clean of the top 2 lines on eclipse the 9100 series, or 7100 series
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: Lizardking
Date Posted: October 16, 2004 at 8:52 PM
Do they hit hard? Do you know the mounting depth for sure?
Posted By: jeffchilcott
Date Posted: October 16, 2004 at 9:00 PM
yes they hit very very hard....I dont have a exact mounting depth right now, I know the aluminums are 6.5 almost exact, so I would say 7 to 8 inches depth for sure
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: Lizardking
Date Posted: October 16, 2004 at 9:11 PM
Would I be gaining anything going from my Diamond M6MarkII 12's to the Eclipse's
Posted By: saranykm
Date Posted: October 19, 2004 at 6:06 PM
lets put it this way....i have the eclipse 6300 series, two 12'' dvc's............these things rock hard! i have the eclipse 5342 power amp to it....my ears bleed. so just imagine the 9000 series are...i hit about 140 db with my subs and amps....so go figure.
-------------
GORILLA
Posted By: jeffchilcott
Date Posted: October 19, 2004 at 6:50 PM
I ran some new 9000 series for awhile but not looking to run that much power plus I love running 4 subs, the look on peoples face when you have 4 beautiful 10's is great....We are running 2 10 inch 7100 series aluminums and hitting 144.7 on the lab just using RMS power only, We are yet to up over the rms rating to see what we do with all 4 in there
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: forbidden
Date Posted: October 19, 2004 at 8:03 PM
The titanium Eclipse subs pound, like a sledgehammer on your brain after a week long drinking binge. Power them properly, have the right box made and watch your poor little car vibrate to pieces. Jeff, try a 147.7 with two sw8122 dvc in a sealed box power from an Xtant x series mono sub amp. With sq to boot. ------------- Top Secret, I can tell you but then my wife will kill me.
Posted By: haemphyst
Date Posted: October 19, 2004 at 8:05 PM
I got one in one cubic foot, net, with the DA7232 running stereo to it. According to Eclipse this is about 2KWRMS, and this driver has never complained once. And I BEAT THE sh*tE out of this thing! Yep, they pound, and sound un-be-freaking-lievable too!
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: Lizardking
Date Posted: October 20, 2004 at 9:58 AM
Do you guys think I would be gaining anything from the Diamonds to the Eclipse's? Doe's anyone have the mounting depth specs for Eclipse subs?
Posted By: Lizardking
Date Posted: October 20, 2004 at 10:03 AM
Oh yeah the reason I ask is the Diamonds power ratings are higher..
|