can I use Kenwood X959 harness in X979?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41059
Printed Date: May 14, 2024 at 10:39 AM
Topic: can I use Kenwood X959 harness in X979?
Posted By: crazymodgsr
Subject: can I use Kenwood X959 harness in X979?
Date Posted: October 17, 2004 at 1:05 PM
I recently sent out my 1.5 year old Kenwood X959 head unit (still under warranty) for repair. After I got it back, it was still acting up so I sent it out again, and requested a replacement. They agreed and sent me a brand new X979, the X959's newer sister model. Anyway, I was wondering if I can still use the X959 harness that I have wired up in my car with my new X979 since they are equivalent models? Also, the reason for this is that I am the third owner of the car and there is barely much length left to the stock wires coming out of the wire loom and I wouldn't even have enough to cut of the old harness, and strip/crimp on the wires to the new harness. Any comments or suggestions?
Thanks
Replies:
Posted By: gus1
Date Posted: October 17, 2004 at 11:48 PM
Yes. Kenwood hasen't changed their harness in a few years.
Gus
-------------
Wherever I go, that is where I end up......
|