deck wont come out?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42002
Printed Date: May 01, 2024 at 2:02 AM
Topic: deck wont come out?
Posted By: cache
Subject: deck wont come out?
Date Posted: October 31, 2004 at 8:44 PM
I was tryin to get the stock deck out of my boss's 1995 ford f250 powerstroke. but it wont come out. i put the DIN tools in and took part of the dash off to pull on it but it wont move. is there some bolts or something in there holding it or what? pictures would help me too if you have any. thanks
Replies:
Posted By: audiobass10
Date Posted: October 31, 2004 at 8:52 PM
Just take a hammer and bash the damn thing out..that's my suggestion.
-------------
Dave
Pioneer Premier DEH-P660
15" Kicker CVR
Profile AP1000M
It's Loud
Posted By: jeffchilcott
Date Posted: October 31, 2004 at 8:53 PM
if it has the din tool you need to put them in and push them outward of each other this should pop the clips holding it in
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: cache
Date Posted: October 31, 2004 at 9:03 PM
actually i just made the DIN tools with some wire.
Audiobass10, i was just about to the point(since the stupid deck doesnt work anyway), but i didnt think my boss would like that too much.
Posted By: 12v.boogie
Date Posted: October 31, 2004 at 9:23 PM
get the real tools and hope you didnt spring the clips. if this dont work buy a hacksaw
Posted By: sk8ingsmurf
Date Posted: October 31, 2004 at 10:46 PM
yeah Ive done the wire way before, gotten it to work once, however Ive tried it about 20 other times with no luck, I would recommend going to walmart and buying the ford radio removal keys, in a family of 5 fords this has been the best $3 I have ever spent, they work so much better than the clothes hanger.
Posted By: Asmodeus
Date Posted: November 01, 2004 at 12:16 AM
I never have used those keys...I have four of the smaller Precision scredrivers and I use them...The beveled head makes it easy to get behind the locks...Just my opinion.. Buy the keys though..Would be a good idea -------------  Making the World A Louder Place
Posted By: auex
Date Posted: November 01, 2004 at 12:20 AM
The proper keys will give you less headaches. But, make sure that your key is not going around the clip and make sure that you stop when you feel some pressure on the wire. Then pull outward on the wire and pull using the tape deck, hopefully you have this.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: cache
Date Posted: November 01, 2004 at 8:28 AM
on my way to malmart. thanks guys
Posted By: cache
Date Posted: November 01, 2004 at 8:29 AM
on my way to walmart. thanks guys
Posted By: Charles_R_H
Date Posted: November 01, 2004 at 1:36 PM
if walmart is sold out, i've seen them at VatoZone "AutoZone"
-------------
ELECTRONICS RUN OFF OF SMOKE, WHEN YOU LET THE SMOKE OUT THEY STOP WORKING
|