Is this a good amp for 2 12" Kicker EX12

Hi guys, i got 2 12" Kicker EX 1204 rated @ 125WRMS and i am looking to buy this amp...

4 x 50WRMS Mosfet Car Amplifier
Features:
- Digital pulse width modulated regulated power supply
- Mosfet power supply devices
- Fully complementary discrete audio stages
- Direct coupled output stage
- Darlington output transistors
- Low overall negative feedback
- Bridgeable to mono operation
- Stereo/mono setup simultaneously
- 4 way protection circuit thermal, current, DC offset and overvoltage
- Soft start delayed turn on
- Gold plated RCA input connectors
- Increased surface area and mass for continuous heat dissipation
- LED power on indicator
- High level inputs
- Input gain control
- Crossover control
- Hi-pass frequency control
- Low-pass frequency control
- Gold plated speaker terminals
- Blade type down fuse mounted externally
- Gold plated power terminals

Specifications
- Power/channel @ 4ohms 50W x 4RMS
- Power/channel bridged @ 4ohms 150W x 2RMS
- Total harmonic distortion Less than 0.1%
- Frequency response 10Hz-30Khz ±1db
- S/N ratio 90db - Damping factor 200
- Low level input sensitivity 100mV-2.5V
- High level input sensitivity 2V-10V
- Low pass (variable) 50Hz-500Hz
- High pass (variable) 50Hz-500Hz
- Dimensions 235(W)x300(L)x54(H)mm
- Power fuse 25A
- Panel Detail 4 X 50WRMS

Can someone tell me whether it's good or not???
btw i need to kow ASSP coz the amp is on Spcecial
Thanks

looking at the amp, if your looking from the specs, it should work for you.

but maybe its just me, but without a brand name to opinionize this... it still seems like this is a fairly nameless,brand name.

- Increased surface area and mass for continuous heat dissipation
- LED power on indicator

those are just 2 among other features you listed that i'd think most amps should have, but they claim them as features.
If they have to put LED power on indicator as a feature i question its brandname and why they put that on there as a feature...