Print Page | Close Window

wedge size

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4230
Printed Date: August 21, 2025 at 12:47 AM


Topic: wedge size

Posted By: blazer88
Subject: wedge size
Date Posted: October 06, 2002 at 12:57 PM

I need to know the size of the front piece of mdf on a wedge enclosure that measures 35.25 wide x 14.5 high x 29.125 deep. This will be cut at a 45deg. angle top and bottom.



Replies:

Posted By: djfearny2
Date Posted: October 06, 2002 at 5:18 PM

WELL WHEN BUILDING BOXES THE FRONT AND BACK PEICES ARE THE BIGGEST PEICES MEANING IT YOU NEED A BOX THAT IS LIKE THIS

THE FRONT PEICE ACORDING TO YOUR MEASURMENTS SHOULD BE 35 1/2 LENGTH SIDE TO SIDE   AND 14.5 HIGH  TOP TO BOTTOM

YOUR SIDE PIECES SHOULD BE 13 LENGTH TOP TO BOTTOM USING 3/4 THINK MDF. TO MAKE A TOTAL OF 14.5

THE MIDDLE PIECES SHOULD BE INSIDE OF THE FRONT AND BACK PEICES EMAIL ME FOR DIAGRAM OF EXPLANATION.



-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.



Posted By: blazer88
Date Posted: October 06, 2002 at 8:16 PM
 Thanx Jonposted_image, I had what I like to call a "Brain Fart" and couldn't think straight today. Thanx again for your help.    Mark


Print Page | Close Window