problem with an amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42502
Printed Date: June 11, 2024 at 7:05 AM
Topic: problem with an amp
Posted By: dave25456
Subject: problem with an amp
Date Posted: November 08, 2004 at 11:04 AM
I installed a plye1600watt amp to 2 500watt legacy and 1 500 watt speaker now the problem is after like about 3 months later he comes back saying one of his speakers wasn't working so I took a look at it two channels or working and the other two or not what can be the problem any explanation will be appreiciated.thanks
-------------
dave25456
Replies:
Posted By: DYohn
Date Posted: November 08, 2004 at 11:21 AM
Neither Pyle nor Legacy are brands known for longevity.... Sounds like it is simply dead. ------------- Support the12volt.com
Posted By: jeffchilcott
Date Posted: November 08, 2004 at 7:10 PM
so did you install this amp to 3 subs total??? kinda confused, what impedance was each side of the amp ap, assuming it is a 4 channel amp? test the speaker on another amo see if its the sub, if not the sub then its probably the amp, if it is tell the guy to buy another cheap amp, they cost what $2?
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: dave25456
Date Posted: November 08, 2004 at 8:46 PM
I tried a pair of 6*9 pioneers and all I got was nothing
-------------
dave25456
Posted By: jeffchilcott
Date Posted: November 08, 2004 at 10:28 PM
amps dead, what ohm load were you running the channels at??? And what channel fried the one with 2 subs or the one with one sub, were they all the same type of sub, size, power rating ect ect??
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: dave25456
Date Posted: November 09, 2004 at 2:35 PM
the only channel working is 3+4 and 1+2 is not I only got to tried it one time I have been waiting for him to get back to me whenn he does what should I do I ran 2 500watt legacy to 3+4 and ran one sub of 500 watt J.L to the other
-------------
dave25456
Posted By: jeffchilcott
Date Posted: November 09, 2004 at 4:36 PM
you still havent answered what are the subs? all the same size? power requirements? ect ect...and muliti amping diffrent subs just sounds like a plan for trouble
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
|