Print Page | Close Window

Replace 04’ Taurus radio with 00-03 cd

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42612
Printed Date: May 14, 2024 at 5:31 PM


Topic: Replace 04’ Taurus radio with 00-03 cd

Posted By: femto
Subject: Replace 04’ Taurus radio with 00-03 cd
Date Posted: November 09, 2004 at 5:41 PM

If I replace 04' Taurus radio/CD control with 00-03' radio/CD player, the airbag will be disabled. If I connect a 10K resistor across pin 3 and pin 17, as suggested by an earlier post, the airbag light will stay off if radio is not connected. However the airbag will be disabled again if I connect the new CD player. I am considering disconnecting one of the wires to CD player. Does anyone happen to know what those two wires for? Thanks.



Replies:

Posted By: femto
Date Posted: November 26, 2004 at 3:57 PM
Works by cut off pin 3 wire (lt.blue/tan) and connect a 10K resistor to the dark blue/orange wire.




Print Page | Close Window