bose stereo line level install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42621
Printed Date: May 15, 2024 at 4:04 AM

Topic: bose stereo line level install

Posted By: silvagtp00
Subject: bose stereo line level install
Date Posted: November 09, 2004 at 7:59 PM

I am looking in installing an line level converter into a 2000 pontiac grand prix . i wanted to know the best place to tap into the speaker outputs because i know the bose amp filters response to each speaker differently inturn not providing a full range . ANY IDEAS

Replies:

Posted By: jstruckman
Date Posted: November 09, 2004 at 9:21 PM

You need to use an active LOC that can handle the low level differential outputs of the receiver, there are several companies that make these, i am please with the Soundgate LOCB.2. It will give you 2.5 volts RMS out no matter the input voltage, just get it as close to the back of the radio as possible to decrease the chance of noise entering the system

Jazzy

-------------

Print Page | Close Window