Porsche install done

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42760
Printed Date: April 29, 2024 at 12:56 AM

Topic: Porsche install done

Posted By: Steven Kephart
Subject: Porsche install done
Date Posted: November 11, 2004 at 4:04 PM

Hey guys, I thought you might be interested in seeing a custom fiberglass install I just finished up. It is done in a 1987 Porsche 928. Here's the link with pictures of the build process: https://www.cardomain.com/memberpage/304268/8

And here are the finished pictures:

posted_image

-------------

Replies:

Posted By: customsuburb
Date Posted: November 11, 2004 at 4:15 PM

You did a nice job on that install. Where is the other end of the port for the sub located at?

-------------

Posted By: auex
Date Posted: November 11, 2004 at 4:41 PM

Have we seen this before, like the building pictures?

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: ravenndude
Date Posted: November 11, 2004 at 5:10 PM

No, I think that was another Porsche

Posted By: Rushman
Date Posted: November 11, 2004 at 6:37 PM

Awsome job Steven........what is the other structure for that mirrors the Brahma sub? Behind the Passanger seat?

-------------
99 F-one fitty
Pioneer Premier H/U
Alpine EQ
Kicker 1200 amp
4 Kicker comp 10s
6 kicker SS65.2 components

Posted By: Steven Kephart
Date Posted: November 11, 2004 at 8:03 PM

customsuburb wrote:

You did a nice job on that install. Where is the other end of the port for the sub located at?

Thanks guys!

The port actually stays under the plastic piece. If you look at the pictures on the link you will see how it sits. My boss assures me that it will work just fine, so I went with it.

Steven Kephart

Adire Audio

-------------

Posted By: Steven Kephart
Date Posted: November 11, 2004 at 8:04 PM

auex]H wrote:

ve we seen this before, like the building pictures?

Yeah, I posted pictures of if partially done a while ago in the fabrication section. That's why I thought I would share teh finished pictures.

Steven Kephart

Adire Audio

-------------

Posted By: Steven Kephart
Date Posted: November 11, 2004 at 8:05 PM

Rushman wrote:

Awsome job Steven........what is the other structure for that mirrors the Brahma sub? Behind the Passanger seat?

That is a cover for the amp rack. You can see pictures on the link above.

Steven Kephart

Adire Audio

-------------

Posted By: kfr01
Date Posted: November 12, 2004 at 11:48 AM

Looks nice Steven - how does it sound while driving w/ the top down?

-------------
New Project: 2003 Pathfinder

Posted By: Steven Kephart
Date Posted: November 12, 2004 at 2:45 PM

kfr01] wrote:

ooks nice Steven - how does it sound while driving w/ the top down?

Thanks! But we are in Seattle, so there is not going to be any listening with the windows and sunroof open for a LONG time. posted_image And actually I haven't heard it yet. I'm just finishing up building the sub for it (it is drying) and then I will be able to listen to it.

Steven Kephart

Adire Audio

-------------