Print Page | Close Window

Jl w6v2 or w3v2?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43064
Printed Date: May 11, 2024 at 10:40 AM


Topic: Jl w6v2 or w3v2?

Posted By: Vandals909
Subject: Jl w6v2 or w3v2?
Date Posted: November 15, 2004 at 6:48 PM

I have a 04 silverado and I was thinking about putting in 2 10w3v2's and run them off of a 500/1 jl amp? My question is , lately I have been thinking about going with 10w6v2's and a 500/1 for each. But I will probably only do one at a time if I go that route. So anyways is the w6v2 going to sound that much better and hit that much harder than a w3v2? Is it worth the extra money?  Thanks for the help!!!



Replies:

Posted By: bigwise1
Date Posted: January 01, 2005 at 12:21 AM
yes, i just switched from 2 10w3v2's powered by a zapco 500/1 in a sealed enclosure to 2 10w6v2's each powered by 1 zapco 500/1 and there is a major difference.  if you can, save up money and wait to get what you really want, (the 10w6v2's)




Posted By: dragonrage
Date Posted: January 01, 2005 at 2:32 PM
Go for a Planet Audio amp and use that extra money to go for the better speakers. Or wait.

-------------
2009 Pontiac G8 in planning stage
HU: ?
Speakers: ?
Amps: ?




Posted By: jeffchilcott
Date Posted: January 01, 2005 at 5:36 PM
the diffrence between the w3v2 and the w6v2 is definatally noticable. Go for it!

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place





Print Page | Close Window