01’ GMC Yukon new HU, no sound

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43253
Printed Date: May 11, 2024 at 4:49 PM

Topic: 01’ GMC Yukon new HU, no sound

Posted By: thunderfoot1
Subject: 01’ GMC Yukon new HU, no sound
Date Posted: November 17, 2004 at 10:12 PM

I have a 01 GMC Yukon. I got a KDC2025 HU with OEM PAC2 and Metra connector, I hook everything up and have no sound. HU powers on, everything look likes it works. I read somewhere that I need to take the A. COMP or P. COMP wire (Blue w/white stripe) from the new headunit harness and splice it directly into the GMC radio harness. But, I have no idea which wire this is or if it will give it any sound. Please...Please someone...if your out there...hook me up!

Oh and I do have Onstar, not hooked up...but it is not a bose system. I can give you pin outs if needed.

Many thanks in advance.

Replies:

Posted By: stavy customs1
Date Posted: November 18, 2004 at 12:23 AM

hook the blue with white stripe wire of the new harness to the solid blue wire and see if that works its the amp turn on wire.

-------------
Best Buy Installer

Posted By: thunderfoot1
Date Posted: November 18, 2004 at 7:26 AM

Stavy1 Customs...thanks for that. I tried that but still no sound.. any other advice. I know Im so close with everything. Im one wire away from hooking every thing up.