’98 Concorde, bypassing factory Infinity amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43406
Printed Date: April 30, 2024 at 4:04 PM

Topic: ’98 Concorde, bypassing factory Infinity amp

Posted By: tbirdman74
Subject: ’98 Concorde, bypassing factory Infinity amp
Date Posted: November 20, 2004 at 2:12 PM

I am looking for information on bypassing the factory Infinity amp (in pass kick panel) in a 1998 Chrysler Concorde without having to buy an adapter. putting in new speakers, and new amps, and just dont want to have to run new wires to the doors. Any help would be greatly appreciated.

-------------
If it don't fit, Force it.
If it breaks, You needed a new one anyway!

Replies:

Posted By: actionjackson
Date Posted: November 20, 2004 at 6:19 PM

In the pass kickpanel is the infinty amp, there will be two plugs, a input and output, find the plug with the speaker wires going to the door and run your wires from your radio to this , beats taking the door panels off, wire are noted in this post

https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1998&make=Chrysler&model=Concorde&ID=17509&type=Stereo

Print Page | Close Window