Kenwood CD Changer

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43487
Printed Date: July 15, 2025 at 9:03 PM

Topic: Kenwood CD Changer

Posted By: sparkyboy
Subject: Kenwood CD Changer
Date Posted: November 21, 2004 at 4:11 PM

Hi Folks
I have just installed a Kenwood KDC-W4527 CD/Radio head unit and i would like to connect my origonal 10 disc Changer (KDC-C603) to it.

The cable that is attached to the 10 disc changer fits in to the rear of my new unit but it does not work.

Does anyone know how i can get this to work as it works ok if i connect the old head unit back up to it !!!.

Cheers Dan

-------------
OOOHH wheres that smoke coming from

Replies:

Posted By: dedlyjedly
Date Posted: November 22, 2004 at 5:04 PM

just a thought, some kenwood changers have a protocol selector switch under where you insert the magazine behind the door. it shoudl have two options "o" and "n" try that in different positions.

also, turn your deck on and off a couple of times after initial connection is made. this may help it "boot up" properly

-------------
MECP certified, 5yrs experience, you probably otta listen bitch!!

Posted By: sparkyboy
Date Posted: November 22, 2004 at 5:25 PM

Hi dedlyjedly

I will have a look later and let you know....if i you dont hear from me again i might have hit the self destruct button posted_image

Cheers Dan

-------------
OOOHH wheres that smoke coming from

Posted By: sparkyboy
Date Posted: December 06, 2004 at 5:20 PM

Hi dedlyjedly
Sorry i took so long to reply been verrryyy busy
I have had a look at the changer unit and there is no button that i can see posted_image

if you have anymore info i would be happy to hear it

Cheers Dan

-------------
OOOHH wheres that smoke coming from

Print Page | Close Window