Print Page | Close Window

Help getting Alpine head to Alpine EQ

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43541
Printed Date: May 20, 2024 at 9:50 PM


Topic: Help getting Alpine head to Alpine EQ

Posted By: mmmcq
Subject: Help getting Alpine head to Alpine EQ
Date Posted: November 22, 2004 at 11:05 AM

Hi y'all.  I was on this back in it's old Yahoo days, and found answers to everything I ever asked.  Let's hope that still happens.

I am putting a Alpine CDA 7845 unit in my dodge caravan, and want to also use a Alpine EQ (model number 3218) with it.  The problem is that the head has RCA females for Sub, Rear out, and front out. and the eq has one pair RCA (male) input right, and a pair of gray wires marked input right and a pair of white input left..

The eq has out in a pair of RCA females for line out (front)  and a pair of female RCA's for rear.

I am using a power board with two amps and a crossover.

One amp is to run a Atomic 10" sub, and the other to run a pair of ADS plates in the rear door, and a pair of BA 5" pro separates in the dash and door pillar, and another pair of 6" BA pro separates in the front doors.

I think I can handle things once I get out of the eq, but may have to come back for more help.

Thanks for the help.

Mike in California   



-------------
mmmcq



Replies:

Posted By: Velocity Motors
Date Posted: November 22, 2004 at 11:18 AM
Sorry, but I think I missed the question. What is it ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: kklagge
Date Posted: November 22, 2004 at 11:50 AM
I think what he's asking is how do you wire a HU w/3 sets of RCA preouts to an EQ w/1 set of RCA inputs (or 2 line level inputs)


Print Page | Close Window