Print Page | Close Window

2 10"s or 1 10 or 12 help

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43944
Printed Date: May 06, 2024 at 6:42 PM


Topic: 2 10"s or 1 10 or 12 help

Posted By: spootydlux4
Subject: 2 10"s or 1 10 or 12 help
Date Posted: November 28, 2004 at 3:33 AM

im thinkin bout gettin either 2 type r 10s with 300rms for each or 1 type x 10 or 12 with bout 900 rms to it, what do u guys think would be louder or sound better? im on a budget of bout 500 to 600 for subs and amp. this is goin in a 02 silverado most likely in sealed enclosures.

-------------
blah blah blah blah



Replies:

Posted By: boxmaker85
Date Posted: November 28, 2004 at 10:29 AM

Hm.... Good choices.  I haven't heard the type x but two type R should sound good.  As far as this is I would choose on budget and which setup will handle more power (and hopefully have more output). 





Posted By: heavilymedicate
Date Posted: November 28, 2004 at 12:44 PM

Have you thought about how you will fit a Type X in your truck?  Type R's are a tight sub and two of them in proper enclosures should pound your cab.  I dont really know what to expect from a Type X.   Soooo....

If it was my setup, I would get a Alpine Type R 12, build a sealed enclosure, power it to rms and be happy.  (actually I would look into a MTX 7500 and JL w3).  Use the money you saved on the extra amp power and subwoofer (and enclosure) and buy components and a amp for them.



-------------
What will you get for Christmas, bad boy? Coal........or Visonik?? - stevdart

Wow, is everyone clueless and lost in the dark? - uthinkuknoaudio




Posted By: spootydlux4
Date Posted: November 28, 2004 at 12:50 PM
yea im leanin towards the 2 type r's cuz ive had one and it was great before i cracked the roll(but that was due to a poor enclosure design underneath seat, the excursion was hitting the carpet and it eventually wore down the roll to where it cracked) has anybody run the type r in anyprograms cuz i want to know the optimal air space and ill probly run it them sealed for better sq. and i am going to get an alpine 4channel and alpine s-series components.

-------------
blah blah blah blah





Print Page | Close Window