Voltages needed

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44121
Printed Date: April 30, 2024 at 4:15 PM

Topic: Voltages needed

Posted By: slasher
Subject: Voltages needed
Date Posted: November 30, 2004 at 9:16 AM

I am trying to bench test my cd chnager from my car.

I need 12 volts and ground? any other voltages needed?

The power connector is a 9 pin din connector i think any help would be appreciated. The cd changer is stuck with cd's in there so I would like to get them out.

It is an Audiovox SP_10CDP changer

Replies:

Posted By: Xracerx
Date Posted: November 30, 2004 at 9:31 AM

There is a hole to put a paper clip in. This will open the deck and eject the CD's. You may need to look in the manual to see where they locate it.

All the unit needs to turn on is Power and a Ground

Posted By: slasher
Date Posted: November 30, 2004 at 9:33 AM

I have the unit connected up wit h the 12v and the gnd.

It still will not power up or open or ANYTHING.

Thanks for the tip though

Posted By: Ketel22
Date Posted: November 30, 2004 at 11:15 AM

you need to hook up two power wires. your constant and your ign. wire and your ground...

-------------
Quad L Handyman services

Print Page | Close Window