Would it came out right

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44331
Printed Date: May 04, 2024 at 1:39 AM

Topic: Would it came out right

Posted By: winston_smith
Subject: Would it came out right
Date Posted: December 02, 2004 at 10:58 PM

So For my first box i made a 3d model of it and took all my mesurements from it. I had some doubts as to if it would come out right, being my first time using a 3d modeling program. Anyhow here's the model i made.
posted_image

Replies:

Posted By: kfr01
Date Posted: December 03, 2004 at 12:02 AM

What modeling program are you using?

-------------
New Project: 2003 Pathfinder

Posted By: xaudiopipex
Date Posted: December 03, 2004 at 12:12 AM

what kind of sub and amp are you going to use?

Posted By: winston_smith
Date Posted: December 03, 2004 at 5:29 AM

SketchUp
Um and the topic did say woot not would some kinda auto spell check??
And i'm using a 12" brahma inverted and a jbl BP600.1

Posted By: stevdart
Date Posted: December 03, 2004 at 6:11 AM

What's a woot?

Posted By: winston_smith
Date Posted: December 03, 2004 at 9:23 AM

Woot as in wow it worked great, happy joy joy lol.

-------------

Posted By: winston_smith
Date Posted: December 03, 2004 at 9:25 AM

12" Adire brahma

Posted By: stevdart
Date Posted: December 03, 2004 at 12:48 PM

The scale of the hole seems to be off. An 11" hole shouldn't look that large on a 14.5 X 14.5 face. And the box appears taller than it does in width. Do you put in all measurements before the program renders a drawing? Do I understand that it sells for $495??

I found https://www.aecbytes.com/review/SketchUp4.htm for the answers to my questions. Yup, $495.

Posted By: winston_smith
Date Posted: December 03, 2004 at 2:21 PM

Yep, i have the demo version. I have 6 hours time left. and your right the hole is not to scale it's 12". The box is 16"H 16"W 14"D
And i can confirm it i have the boards all cut out and drilled. Gunna be putting it togather very soon.

Posted By: jeffchilcott
Date Posted: December 03, 2004 at 4:58 PM

should work great, let us know when and if you are ready to go vented.

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place