need help on instalin switch for my sound
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44352
Printed Date: June 06, 2024 at 7:19 PM
Topic: need help on instalin switch for my sound
Posted By: chexmixelite
Subject: need help on instalin switch for my sound
Date Posted: December 03, 2004 at 12:56 PM
I will be installing my capacitor, amp, and 4 10s on my xb.... Jus a quick questoin though... I will be instaling a on/off switch to turn on my sounds whenever I want to... Where should I install the switch??
- between the fuse and cap?
- between cap and amp?
- or on the remote from the HU to the amp?
Any recommendation??
Thanks in advance
Replies:
Posted By: stevdart
Date Posted: December 03, 2004 at 1:06 PM
#3. Never put a switch on a power wire. And the REM wire switch will be right up front where it's easy to get to.
Posted By: chexmixelite
Date Posted: December 03, 2004 at 1:56 PM
Hey thanks for the quick response.... Another question though.... The capp will always have voltage then if I am correct?? Will it hurt the capp....
Posted By: 97Avalonxls
Date Posted: December 03, 2004 at 3:02 PM
i doubt it, I've had my cap getting constant volts for a while and have neither experienced any adverse effects on the cap or batt drainage. I might suggest disconnecting your battery if you are going to not drive the car for a long time, months
|