Hello Friends, Box
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44398
Printed Date: May 16, 2024 at 5:50 AM
Topic: Hello Friends, Box
Posted By: Klapping
Subject: Hello Friends, Box
Date Posted: December 03, 2004 at 11:48 PM
Is finally build... costed me bout... 24 bucks... total... I used my dads nail gun... Tack Tack Tack... used wood glue, etc... and caulked it... the holes are about 10.5" i need to make em 11... would a sub fit in 10.5? ...
12" shiva... by the way...
Replies:
Posted By: kfr01
Date Posted: December 03, 2004 at 11:52 PM
You should consult the Adire driver size sheet. It tells the exact basket diameter of the Shiva.
Congrats on the box.
-------------
New Project: 2003 Pathfinder
Posted By: /R7
Date Posted: December 04, 2004 at 12:23 AM
agreed on the congradulations, im glad 18-20pages got you that far ;p
Posted By: Klapping
Date Posted: December 04, 2004 at 12:51 AM
hey hey no smart ass comments... =)
but ya... i just found a jig saw... lol... and cut it to 11" diameter... then put in my new amp... with my sony xplods still... i am gunna order my shivas on monday prolly...
nail guns... are my savier...
Posted By: /R7
Date Posted: December 04, 2004 at 1:00 AM
your sonys sound different in the new box? im assuming they do, but for better or for worse?
Posted By: Klapping
Date Posted: December 04, 2004 at 1:01 PM
the new box is for 12's ... my kinda new bot old box that i sealed that was ported before... still has the xplods on it... they are stuck into two pieces of mdf with 10" holes for them... well, 9" ... or w.e... and the boards are mounted to the front of my old box... so, it sounds like sh*t... lol... they are 10's... and all my boxes are made for 12's...
but ya, i caulked the living hell out of the new box... it isnt gunna leak a damn pinch of air...
i have been looking but cant find... anyone kno where i could get 2 SHIVAS, for under 125 a piece? ...
trying it save a few bucks...
EDIT: which ones would be better of the shivas? ... they have like mark III ... mark IV ... which one is betta?
Posted By: DYohn
Date Posted: December 04, 2004 at 1:52 PM
The price for a Shiva is $125 shipping included. You won't find them cheaper, except maybe someone on eBay might have some used ones. The "mark" number simply indicates which generation they are. IV is the newest design, III is older. Go HERE and you can order them, and also scroll down for application suggestions and links to Adire's technical specs for this driver. You have been told all of this before so I HOPE you do not keep asking this question again... ------------- Support the12volt.com
Posted By: Klapping
Date Posted: December 04, 2004 at 7:16 PM
u deleted my post? ...
|