Print Page | Close Window

Adire Shivas JBL 600.1 amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44626
Printed Date: July 14, 2025 at 9:32 AM


Topic: Adire Shivas JBL 600.1 amp

Posted By: Klapping
Subject: Adire Shivas JBL 600.1 amp
Date Posted: December 07, 2004 at 12:30 AM

how do you wire two shivas to a JBL 600.1 amp? ? ?



Replies:

Posted By: /R7
Date Posted: December 07, 2004 at 1:59 AM
https://www.rockfordfosgate.com/rftech/wiringwizard.asp

gl



Posted By: Klapping
Date Posted: December 07, 2004 at 11:36 PM
there isnt a dual 8ohm option ?...


how would u wire that?

and it sais to look at the owners manual fo the amp... and, the manual sais nuthing about wiring subs...



Posted By: stevdart
Date Posted: December 07, 2004 at 11:49 PM

The Shivas are dual 8 ohm, and you have two of them?  Wire coils parallel, and subs parallel.  The amp will operate at 2 ohms.

posted_image




Posted By: winston_smith
Date Posted: December 08, 2004 at 12:07 AM
Might that be ms paint art? good job tho.



Posted By: stevdart
Date Posted: December 08, 2004 at 8:55 AM
It is.  I draw the diagram in Paint, and save it as (name).jpg.  Then I open it in MS PictureIt!, add text labelling if desired, then pull down File-Save Special-save as a web ready pic.  Just check the byte size and width, and adjust size to below 30 kB and <450 pixels width per forum rules.  Upload using the image upload icon on the reply screen posted_image.


Print Page | Close Window