crossover help?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=44709
Printed Date: June 07, 2024 at 12:50 AM

Topic: crossover help?

Posted By: sexican
Subject: crossover help?
Date Posted: December 08, 2004 at 10:44 AM

how would i wire up these crossovers i am about to get them and i want to know how to install them .

https://cgi.ebay.com/dll?ViewItem&rd=1&item=5735524652&ssPageName=STRK:MEWN:IT

any help would be greatly appreciated thanks

-------------
LEO

Replies:

Posted By: DYohn
Date Posted: December 08, 2004 at 11:10 AM

Input = speaker level signal from your amp. Woofer = output to your woofer. Tweeter = outputs for your tweeter, one at 0db (use this one first) and one attenuated. If the tweeter is too bright or too loud then try the attenuated output. This allows you to conpensate somewhat for positioniong errors.

Are you certain these crossovers will work well with your speakers? What's the crossover frequency on these things?

-------------
Support the12volt.com

Posted By: sexican
Date Posted: December 08, 2004 at 6:05 PM

ok thanks for the info really helpful

to tell you the truth i dont know what kind of frequency these crossovers have but i was stupid and bought them with out doing the research. Do you think these crossovers are not what i need? I was trying to run my door speakers with them but maybe need a different type of cross over. thanks

-------------
LEO

Print Page | Close Window