Power wire and 4ch amp?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45602
Printed Date: May 10, 2025 at 8:30 PM

Topic: Power wire and 4ch amp?

Posted By: rt2party
Subject: Power wire and 4ch amp?
Date Posted: December 20, 2004 at 11:58 AM

how do i run a power wire in a CC truck for a 4ch. amp withotu running it next to the speaker cables for the 4 speakers? my plan is to run a 4Ga. power wire to a dist. block w/ 2 8Ga. power wires to my 4ch and sub amp. but i do not know how to run the power wire to the midle or back of th truck without it being next to the speaker wires at some point? anyone wanna share how they ran thers? thanks! ~Ryan

Replies:

Posted By: auex
Date Posted: December 20, 2004 at 12:48 PM

First, what the hell is a CC truck? Second it isn't speaker wires you have to worry about, it is rcas.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: supradude
Date Posted: December 20, 2004 at 1:44 PM

Just run the 4 gage wire down one side and the rca's for the 2 amps down the other side. Yeah, what is a CC truck? By the way, get a high quality set of rca's from the start. Cheap rca's cause lots of problems.

-------------
'85 Toy

Posted By: rt2party
Date Posted: December 20, 2004 at 4:01 PM

sorry, CC = Club Cab, it means there is a back area (back seat is an overstatement) but plenty of room for big speakers.thanks for the help. i will be installing this system in a 99' Dodge Dakota R/T (5.9L engine!). i will be posting some pics of the custom box i am doing for the sub/subamp in the fiberglass forum after x-mas (AKA: when my poor ass can afford to build it) thanks for your help. ~Ryan

Print Page | Close Window