Punch 700s bridging?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45688
Printed Date: May 09, 2025 at 6:46 PM
Topic: Punch 700s bridging?
Posted By: turbotyphoon69
Subject: Punch 700s bridging?
Date Posted: December 21, 2004 at 12:44 PM
Does any one have an owners manual, or know where to find the diagram on how to wire the outputs for bridging? i searched off of google and i didnt find a thing!
-------------
1993 GMC typhoon pearl white- 3in drop with 18s
1996 Grand Cherokee frost white- Lifted on 20in Rims and 33in All Terrain KO's
Replies:
Posted By: jeffchilcott
Date Posted: December 21, 2004 at 2:17 PM
The bridging twrminals should be the outer left pos and outer right neg...both will be on the outer sides. The recomended load on these amp is a 2 ohm minimum
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
|