diamond hex blown?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45848
Printed Date: July 12, 2025 at 8:22 AM
Topic: diamond hex blown?
Posted By: pbmswt69
Subject: diamond hex blown?
Date Posted: December 23, 2004 at 11:40 AM
I had a set of hex speakers hooked up and they kept cutting in and out, then when I got home I took them out and one of the woofers, which was cutting in and out, wouldn't do anything, no sound, no popping, nothing. Do you think that it's blown? and is there any way to get a speaker repaired or would it be a waste? thnks
Replies:
Posted By: kfr01
Date Posted: December 23, 2004 at 12:40 PM
Did you buy it from an authorized dealer?
-------------
New Project: 2003 Pathfinder
Posted By: jeffchilcott
Date Posted: December 23, 2004 at 1:05 PM
I have heard of the terminals going bad on a few of these speakers look at the tinsel lead and see if it is solid and try touching your wires to it at a low volume to see if the woffer works
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
|