Print Page | Close Window

96 Sebring Factory Components

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46097
Printed Date: May 14, 2024 at 2:09 PM


Topic: 96 Sebring Factory Components

Posted By: Kcautosound
Subject: 96 Sebring Factory Components
Date Posted: December 27, 2004 at 8:24 AM

Hey guys... been a loooong time since I worked on a Chrysler Sebring.  I noticed that it has the factory compontents in it.  I know that the factory 6 1/2" speakers in the doors only play mid-bass.  The radio is the factory CD/Cassette with the Joystick to fade the speakers.  If anyone has done these before I am wanting to either just put components into the car using the factory cross-over points or maybe just put some coax speakers into the door and see if I can hardwire it.  In the past we used to just put a new radio into the car and then new speakers but this customer is a pain.  They want to keep the factory radio and just fix the door speakers.  Basically the tweeters are blown in the dash and the mid speaker is sounding really bad as well. 




Replies:

Posted By: Bestbuy577
Date Posted: December 30, 2004 at 9:47 AM
You would be fine just replacing the speakers at the factory crossover points. Just a reccomendation, find 6x9's for the door that have about 15watts r.m.s. and same thing for the 3 1/2's for the dash.

-------------
Best Buy Store#577 Oxford Valley, PA




Posted By: Kcautosound
Date Posted: December 30, 2004 at 11:55 AM

I thought the speakers were 6x9's as well but after pulling the door panels off I found out that they are the oversized 6 1/2's






Print Page | Close Window