started building my box
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46195
Printed Date: May 12, 2025 at 5:50 PM
Topic: started building my box
Posted By: cavyracer2003
Subject: started building my box
Date Posted: December 28, 2004 at 10:23 AM
well i posted here a few days ago about building a box for my 9500 and i started it yesterday.....but i am wandering, i am going to flush mount the sub so i will be putting another identical piece of wood over the front of teh box.....i will just cut the opening bigger to make it flush....now when i do this it will extend my port another inch....can i just take an inch off the beginning of the port inside the box to make up for the inch on the end....sorry if that is hard to understand.....if you guys need to i can draw a picture....thanks for the help
Replies:
Posted By: kfr01
Date Posted: December 28, 2004 at 10:27 AM
If you wish to keep the port the same size, then yes, cut some off the back.
-------------
New Project: 2003 Pathfinder
Posted By: cavyracer2003
Date Posted: December 28, 2004 at 11:19 AM
ok thanks
|