gain, eq, frequency
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=46486
Printed Date: May 14, 2025 at 1:36 PM
Topic: gain, eq, frequency
Posted By: cavyracer2003
Subject: gain, eq, frequency
Date Posted: December 31, 2004 at 12:46 PM
im trying to find the best setting for my gain, eq, and frequency.....i know that for gain you set the volume to the highest you would listen to it at and turn the gain up till it distorts and then turn it down a little.....now with my eq, and frequency settings on my amp do i do the same....also which order should i do them in....
Replies:
Posted By: dwarren
Date Posted: December 31, 2004 at 1:18 PM
first off is this for subs? what amp is it? if it is for subs you will more than likely want to set your freq. at about 45, the eq kind of equates to more "boom" in the speakers, but this will make your amp run hotter though so use it sparingly.
-------------
Posted By: cavyracer2003
Date Posted: December 31, 2004 at 1:38 PM
ya....its a 12" mtx 9500 hooked up to an mtx 1501d......
Posted By: dwarren
Date Posted: December 31, 2004 at 2:42 PM
Well most of info was quoted from the mtx guys, I am running a MTX 1000d, so its really similar, the freq. knob about half way , unless they put some markings... or call MTX they are pretty helpful.
-------------
Posted By: cavyracer2003
Date Posted: December 31, 2004 at 3:13 PM
o thanks for the help
Posted By: cavyracer2003
Date Posted: December 31, 2004 at 3:21 PM
damn i just called and they are closed....guess ill have to wait till monday
|