Print Page | Close Window

amplifier bypass 1994 /1995 pathfinder

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47183
Printed Date: July 22, 2025 at 5:13 PM


Topic: amplifier bypass 1994 /1995 pathfinder

Posted By: labtec
Subject: amplifier bypass 1994 /1995 pathfinder
Date Posted: January 08, 2005 at 12:00 AM

Trying to install a pioneer mp3/cd player into a 1995 nissan pathfinder.

it is early 1995 so may be wired as a 1994 

Factory deck is a Clarion model no. pn-9661h, part no. 286-7756-13

Speaker amp in rear passenger panel is model no. en-966n part no. 286-7062-58

And model no. en-998n part no. 286-7062-57

 

I got the deck wired up and everything it lights up but there is no sound.

I am wondering how to  bypass the speaker amps.

Is there any wiring diagrams for those amps

Any help would be appreciated.




Replies:

Posted By: labtec
Date Posted: January 08, 2005 at 12:13 AM

Trying to install a pioneer mp3/cd player into a 1995 nissan pathfinder. It is early 1995 so it may be wired as a 1994.

Factory deck is a Clarion model no. pn-9661h, part no 286-7756-13.

Speaker amp in rear passenger panel is model no. en-966n part no. 286-7062-58 and model no en-998n part no 286-7062-57

I got the deck wired up and the panel works ok but there is no sound.

I am wondering how to bypass the speaker amps.

is there any wiring diagrams for those amps

Any help would be appreciated./

Not sure why all the other crap got mixed up in the previous post. Might have happened when I pasted it in.





Posted By: geepherder
Date Posted: January 08, 2005 at 10:13 PM

Have a look here to match up which plugs you have behing the deck, and hook it up accordingly.

https://www.installdr.com/Harnesses/Nissan-Wiring.pdf



-------------
My ex once told me I have a perfect face for radio.




Posted By: labtec
Date Posted: January 09, 2005 at 1:11 AM

Thanks for the info. I got it figured out. had to use a battery to trace the wires back to the rear passenger side panel (where the two amps were located. Then I used a battery to locate the wires for the speakers. The front tweeters were 2.4 ohm and the larger speaker was 3.4 so I wired them in series. The rear speakers were already hooked together & they showed as 4 ohms each side combined. (didn't look to see how it was wired)

After all that. & doing it out in the cold. Works great.

Great forum here. I found a lot of useful info. Thanks.






Print Page | Close Window