wiring kenwood car audio system
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47259
Printed Date: November 03, 2025 at 7:09 PM
Topic: wiring kenwood car audio system
Posted By: j3ja
Subject: wiring kenwood car audio system
Date Posted: January 09, 2005 at 4:20 AM
Replies:
Posted By: NAT_87
Date Posted: January 09, 2005 at 7:08 AM
Posted By: stevdart
Date Posted: January 09, 2005 at 7:43 AM
Posted By: kfr01
Date Posted: January 09, 2005 at 9:18 AM
First, stop talking in max power - list rms instead.
Second, tell us what your question is.
Third, I'd probably run the front speakers with channels 1 and 2, then bridge channels 3 and 4 to the sub. Run the rear speakers off the deck.
Fourth, get professional help or do some research regarding gains and crossover setting and you'll have a fine sounding system if you aren't an idiot w/ the volume control.
Hope this helps.
-------------
New Project: 2003 Pathfinder
Second, tell us what your question is.
Third, I'd probably run the front speakers with channels 1 and 2, then bridge channels 3 and 4 to the sub. Run the rear speakers off the deck.
Fourth, get professional help or do some research regarding gains and crossover setting and you'll have a fine sounding system if you aren't an idiot w/ the volume control.
Hope this helps.
-------------
New Project: 2003 Pathfinder
Posted By: j3ja
Date Posted: January 09, 2005 at 11:00 PM