Print Page | Close Window

Kenwood KDC-MP625 no sound from CD or CH

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47305
Printed Date: May 15, 2025 at 11:54 AM


Topic: Kenwood KDC-MP625 no sound from CD or CH

Posted By: teal9d4
Subject: Kenwood KDC-MP625 no sound from CD or CH
Date Posted: January 09, 2005 at 6:00 PM

I'm wondering if anyone out their could help me out with this one?  I just installed a brand new KENWOOD KDC-MP625 and I only have volume on the TUNER source.  The volume doesn't come thru the speakers when a CD is playing or a Disc Changer is?  Can anyone help me figure this out or is the unit d.o.a, please help me!!!



Replies:

Posted By: auex
Date Posted: January 09, 2005 at 6:05 PM
Did you hook up the remote turn on or the antenna wire as the remote turn on wire? What kind of car?

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: teal9d4
Date Posted: January 09, 2005 at 6:41 PM
Yes it's hooked up, Acura 97' CL the tuner works fine but when I switch to CD or Changer the volume goes out.  It play the counter counts but no volume?  Is there a setting I don't have right not sure?...Thank you though




Posted By: audifive
Date Posted: January 09, 2005 at 7:23 PM
make sure you used the blue/white wire instead of the blue wire from the head unit so the factory amp stays on all the time.  the blue wire is for power ant. and shows 12+ only when the tuner is on so the antenna goes down when you play cds. 




Posted By: teal9d4
Date Posted: January 09, 2005 at 7:33 PM
Yes, thank you that was the problem.  I can't believe I made such a stupid mistake, I wasn't thinking about the power antenna wire!  And thank you too "auex" I figured out right where you were going with your reply, you two were a successful help with this issue!





Print Page | Close Window