95 Quest HU Question

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47377
Printed Date: May 15, 2025 at 11:37 AM

Topic: 95 Quest HU Question

Posted By: Bigmaine
Subject: 95 Quest HU Question
Date Posted: January 10, 2005 at 4:32 PM

Can someone tell me which harness I need for a new HU. Do I need the one with the amp bypass?

-------------
"Intelligence magnifies Ignorance"

Replies:

Posted By: Bigmaine
Date Posted: January 10, 2005 at 4:37 PM

heres bigger pics since the thumbnails aren't working

posted_image

-------------
"Intelligence magnifies Ignorance"

Posted By: stevent
Date Posted: January 10, 2005 at 4:57 PM

You need a ford premium sound harness with bypass plug. You will have to locate the factory amp in the drivers rear cavity and install the bypass plug there.

Posted By: Bigmaine
Date Posted: January 10, 2005 at 5:11 PM

thanx stevent...the amp location would've been my next question.

-------------
"Intelligence magnifies Ignorance"

Posted By: customsound
Date Posted: January 10, 2005 at 10:38 PM

also if you have factory subs, u might want to check into the ford amp integrator harness, it has level adjust so you can set it like you want it, as far as amp location, look behind the left side trunk lining.

Posted By: Bigmaine
Date Posted: January 11, 2005 at 2:00 AM

the quest i'm working on doesn't have a factory sub...at least i don't think so, but my father's expedition does and i was thinking about using the intergration harness for his.

does anyone know what kinda power that factory amp puts out

-------------
"Intelligence magnifies Ignorance"

Posted By: customsound
Date Posted: January 11, 2005 at 9:04 AM

the ford premium jbl audio has enough power to produce good sound for a 10" pioneer, the pioneer also gives enough magnet clearance in the case that you are replacing the factory sub.

Print Page | Close Window