Box Design with WinISD help
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47461
Printed Date: April 26, 2024 at 1:20 PM
Topic: Box Design with WinISD help
Posted By: mrdragon
Subject: Box Design with WinISD help
Date Posted: January 11, 2005 at 2:57 PM
Hi guys,
Try to design my Pioneer TSW305C with WinISD....and this is results:
From what i heard the graph "yellow" line need to be with 0db to -3db, as it show on this design the line is way over, wat r another alternatives so that the yellow line r within 0db to -3db???
Cheers :)
Try to design my Pioneer TSW305C with WinISD....and this is results:
From what i heard the graph "yellow" line need to be with 0db to -3db, as it show on this design the line is way over, wat r another alternatives so that the yellow line r within 0db to -3db???
Cheers :)
Replies:
Posted By: Drewt
Date Posted: January 11, 2005 at 3:53 PM
Posted By: mrdragon
Date Posted: January 11, 2005 at 4:02 PM
Posted By: DYohn
Date Posted: January 11, 2005 at 4:34 PM
Posted By: mrdragon
Date Posted: January 11, 2005 at 5:24 PM
Ok this is what Pioneer recommended...i see not much of a diff :(
Posted By: DYohn
Date Posted: January 11, 2005 at 5:56 PM
Here's the curve I get from WIN ISD using the correct driver parameters (that I posted in your other thread.)
-------------
Support the12volt.com
Posted By: mrdragon
Date Posted: January 11, 2005 at 9:53 PM