Need pin outs for Explorer subwoofer out

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47730
Printed Date: June 11, 2024 at 11:35 AM

Topic: Need pin outs for Explorer subwoofer out

Posted By: VICTORBMW
Subject: Need pin outs for Explorer subwoofer out
Date Posted: January 14, 2005 at 7:50 PM

I need to know pin outs for out put on the 2002 explorer radio and for navigator 20043 radio

Any help will be appreciated.

-------------
:D victorbmw

Replies:

Posted By: rolln_on_em
Date Posted: January 15, 2005 at 12:41 PM

if the rear of the radio has a small 8 or 8 pin plug then I remember RED / black being turn on, and the other two signal wires, you do not need to hookup the uninsulated wire.

If all else fails just remove rear quarter panel to check for wirecolors to factory amp.

Also remembver to use atleast a 570ohm resistor on your turn on lead, to avoid turn on pop.

Hope this helps

Bryan

-------------
Yeah I drive a slow car; but damn it looks good

Posted By: VICTORBMW
Date Posted: January 31, 2005 at 8:40 PM

Thanks Bryan for your help It sounds real good !

-------------
posted_image

victorbmw

Print Page | Close Window