rca question
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47802
Printed Date: May 17, 2024 at 10:38 PM
Topic: rca question
Posted By: rhdAndy
Subject: rca question
Date Posted: January 15, 2005 at 7:06 PM
im putting 4 subs in my truck, made the box, and the ampo is going to be displayed, i dont want to run two sets of rca's and i had a question, im running two sub at 2 ohms, and the 4 chaanelk amp im using is goign to be brigged to 2 channels, since ists going to be mono, do i have to run 4 rca's or can i just plug in one rca, to channel one, and the 2nd to chennel three?
Replies:
Posted By: DYohn
Date Posted: January 15, 2005 at 7:23 PM
It depends. What's the amp? ------------- Support the12volt.com
Posted By: rhdAndy
Date Posted: January 15, 2005 at 8:07 PM
audiobahn 150dp think there might be a 4 in there somehwere, i was also thinking that if im not using seperaters, that i could harm the speakers b/c the one on 3 and the one on 1 would still be stereo, and welli dont know im kinda confused
Posted By: DYohn
Date Posted: January 15, 2005 at 8:59 PM
I suggest using Y-cables to connect one RCA to 1-2 and the other channel to 3-4. ------------- Support the12volt.com
Posted By: rhdAndy
Date Posted: January 16, 2005 at 1:01 PM
thanks man, ill do that do you guys know of anyone who has done this, or is it common?
Posted By: DYohn
Date Posted: January 16, 2005 at 1:52 PM
It is common. ------------- Support the12volt.com
|