1994 Ford Premium Sound

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=47837
Printed Date: May 05, 2024 at 4:50 AM

Topic: 1994 Ford Premium Sound

Posted By: attlfrank
Subject: 1994 Ford Premium Sound
Date Posted: January 16, 2005 at 7:47 AM

We are installing a Kenwood CD into 1994 Explorere that had a Ford Premium Sound System. The radio power is ok but unable to power speakers. There are two plugs one for speakers and one for power supply. Is there an amp in the auto wiring that needs to be powered up

Replies:

Posted By: Jay T
Date Posted: January 16, 2005 at 9:02 AM

Any time I've encountered ford "premium" stuff. I've ditched. Especially if its dated a couple of years. Use the existing speaker wiring from the front and rear speakers that runs to the factory amp. Just cut it and run the wire to the new deck.

Posted By: tech460
Date Posted: January 16, 2005 at 9:36 AM

You do not have a speaker plug, you have a power amp input plug and don't cut it. You are not getting any sound because you are not turning the amp on. Put your Kenwood's blue/white wire to the blue/white wire in the harness labeled "amp turn on".

Print Page | Close Window