boston s80

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48647
Printed Date: July 14, 2025 at 9:26 AM

Topic: boston s80

Posted By: cruelneo
Subject: boston s80
Date Posted: January 26, 2005 at 12:09 PM

can you put reg. boston speakers that are factory made 4ohm load put them in parallel and make it a 2ohm load so the amp can send more power thanks let me know.

Replies:

Posted By: dwarren
Date Posted: January 26, 2005 at 12:21 PM

yes you can, but it usually isn't a great idea since they won't sound as nice as they were in a 4ohm setup, distortion goes up.

-------------

Posted By: cruelneo
Date Posted: January 26, 2005 at 2:03 PM

well in my case it made them sound great but i just want to see what affects would happen but thanks.

Posted By: stevdart
Date Posted: January 26, 2005 at 8:03 PM

They will sound better because they're louder. Once you replace the amp with one that outputs sufficient power into a 4 ohm load, you will appreciate the difference in quality the amp will make. Boston = SQ, so treat them with the cleanest power that you can.

Posted By: cruelneo
Date Posted: January 31, 2005 at 11:45 AM

so what 4 channel do u think it was on an alpine f340

Print Page | Close Window