Alpine CDA-7893 w/0 amp?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48779
Printed Date: May 13, 2025 at 6:48 PM
Topic: Alpine CDA-7893 w/0 amp?
Posted By: goshred025
Subject: Alpine CDA-7893 w/0 amp?
Date Posted: January 28, 2005 at 2:56 AM
This deck is currently hooked up to an amp. I was search to the older post and i havent understood what i must do to run the deck with out an amp. So could some one make a simple step by step on how to change it over? Would i be able to use the fuse and wire from that runs from the battery to the head unit? what wire would i connect it to. Or would i just need a new wire harness?
Replies:
Posted By: blg748
Date Posted: January 28, 2005 at 7:10 AM
read the manual . go to alpines site if you want to and download your manual. if you know how ho to get to the MENU setting then the SETUP and if its like my deck in the setup money will have options like sub on off and and then something called PIC its ON for deck amp to be on and put it to OFF if you want to power everythign via extrernal amps.
|