no sound from sirius sat on a alpine 9835
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48889
Printed Date: May 02, 2024 at 2:51 AM
Topic: no sound from sirius sat on a alpine 9835
Posted By: quick4321
Subject: no sound from sirius sat on a alpine 9835
Date Posted: January 29, 2005 at 5:13 PM
I just hooked up the sirius add-on unit to my alpine 9835. I activated it and I see all the channels but I get no sound. Is there something I need to do so I get sound? I know my radio works because I get sound from the tunner. Thanks for any help!
-------------
Clarion DRX9255
Dynaudio MD130, MD140/2, MD160, MD170
(4) ID V3. 12" Dual 2ohm IB setup
EPX2 Symmetry w/ zapco line drivers
Monior 1 amps (2)MK2.120, MK4.70
Hifonics Colosus VII 1600x1
Replies:
Posted By: Alpine Guy
Date Posted: January 29, 2005 at 6:17 PM
Do you have the AUX Ai-net input turned on? I haven't seen one of these units yet so ima shot in the dark. ------------- 2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
Posted By: quick4321
Date Posted: January 29, 2005 at 7:13 PM
ive tried it with aux turned on and off. Neither way produces sound. It recognizes the unit and its working, jsut no sound comes out. Im sure theres a setting I dont know about.
-------------
Clarion DRX9255
Dynaudio MD130, MD140/2, MD160, MD170
(4) ID V3. 12" Dual 2ohm IB setup
EPX2 Symmetry w/ zapco line drivers
Monior 1 amps (2)MK2.120, MK4.70
Hifonics Colosus VII 1600x1
Posted By: the don
Date Posted: January 29, 2005 at 9:08 PM
check the ant if they are not pluged in all the way you will not here any sound
-------------
ladys if i can,t fry it i don,t eat it
Posted By: Asmodeus
Date Posted: January 30, 2005 at 3:16 AM
When all else fails..... RTFM....Read The F&^*ing Manual.... Alpines have a lot of settings and you may just be missing one...So read through the manual and see what you can find... When RTFM fails...Call Alpine Tech Support or send an E-Mail... -------------  Making the World A Louder Place
Posted By: devilsquid
Date Posted: January 30, 2005 at 11:45 AM
all you have to do is make sure all settings related to the XM are turned on...the deck first recognizes the unit as XM, then changes over to Sirius...you wont be dissapointed with your choice! As for connection and no sound...this sounds dumb, but check it anyways...you probably have your input/output on the sat box reversed...check it...you might be suprised! When the cable is pluged into the wrong side, that is exactly what will happen...trust me, i know!
-------------
|