ok so i really don't know much about crossovers and i jumped the gun and purchased these two crossovers off ebay without knowing what they could do. are these crossover for highs or to help base? kind of comfused:errr:
https://www.idswindowtint.com/113004/crossovers1-01.jpg
-------------
LEO
these are used in a component system consisting of a mid bass driver and a tweeter. basically it will seperate the frequencies going to the speakers, no bass to the tweeters, etc. why did you buy them?
-------------
i bought these because i wanted them to help out my highs. but i bid on them and then i realized i didnt know what they were for.
so are they good for component speakers/6x9/ tweeters? do i need to hook them up to an amplifier or how do they work. or should i get another crossover.
whats a good speaker that would work with this
thanks
-------------
LEO
good for component speakers yes, meaning a seperate mid and tweeter. You will probably won't be able to power a 6x9 with these since the 6x9's have a built in x-over and only one input.
Again what are specifically wanting to do with these? list what speakers and components you have please
-------------
good for component speakers yes, meaning a seperate mid and tweeter. You will probably won't be able to power a 6x9 with these since the 6x9's have a built in x-over and only one input.
Again what are you specifically wanting to do with these? list what speakers and components you have, please.
go to www.bcae1.com and carefully read the passive crossover section number 54.
-------------