Print Page | Close Window

Clarion DB325 install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49322
Printed Date: May 14, 2025 at 1:21 AM


Topic: Clarion DB325 install

Posted By: Robert M
Subject: Clarion DB325 install
Date Posted: February 04, 2005 at 6:29 AM

i was installing this deck in a friends 2001 accord and got everything hooked up, dash back together, and went to test the deck out and the only thing it would do was when you pressed the function button it would say TEL. it wouldnt do anything else if you pressed any other button. i was told there was a small reset button under the face plate and pushed that and still no change. does anyone know what is wrong with this deck? it came out of his old car and worked fine while in there. the only thing i could think TEL was for was a cell phone mute but it has no input for one. all the wires anr matched up correctly and the only wire i didnt use was the power ant. please help me out.




Replies:

Posted By: Bmnicolosi
Date Posted: February 04, 2005 at 10:13 AM
it may have a built in security on it, and it wants a code, like some kenwoods and factory radios.  th ebest thing to do is contact clarion and ask them.



Posted By: torkey
Date Posted: February 04, 2005 at 10:48 AM
you've shorted the tel mute wire....i thinks its brown on clarion to ground...check your wiring and make sure that this wire is not grounded or bare and touching a ground or the deck..


Print Page | Close Window