Hey all....I suppose the easiest way to do this is just list all the equipment I own, and hope that some of you pro's out there can help me design the best system using what equipment I already have, so here goes. . . . .
Head Unit: Alpine cda-7845
Amplifiers: PPI 2240 two channel, PPI 4480 four channel, MMATS lm2100 2 channel
Capacitor: Rockford Fosgate Punch 1 farad
Speakers: Mb Quart rsc213 5.25" comp set, Mb Quart rsc216 6.5" comp set, Infinity Kappa 50.1cs 5.25" comp set, Infinity Kappa 692.1i 2-way 6x9's, Polk Audio EX369 3-way 6x9's
Subwoofers: two Mb Quart rwc254 10" dvc 4ohm, two MMATS P2.5 pro series 10" dvc 4ohm
That's pretty much all of it, so hopefully there are atleast a few of you out there that are familiar with most or all of my stuff, and can give me some helpful knowledge and advice on how to go about designing it! Also, if there is any other vital pieces you feel I may need, please let me know, Thanks!.....
i would use your alpine deck and the infinity 5.25 in front and the infinity 6X9 in the rear infinities sound nice drive them with your ppi 4 ch, use you rmmats im 2100 to your p2.5's get rid of the cap not much good really if you have room later put in the mb quart subs with the ppi 2240 but only if you do not have enough bass. haha
-------------