LOC’s and high freqency

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49764
Printed Date: May 13, 2025 at 3:09 PM

Topic: LOC’s and high freqency

Posted By: eiknujrac
Subject: LOC’s and high freqency
Date Posted: February 09, 2005 at 11:34 PM

Quick question:

Can Line Output Convertors be used to send high frequency signals to amps that will be powering speakers? (only used them with LPF sub amps). If so, how will the quality be?

Thanks!

Replies:

Posted By: Asmodeus
Date Posted: February 09, 2005 at 11:38 PM

Yes it will....It will work fine...

But also on most amps they have a high pass input where you hook your speaker outputs from your HU to your amp directly...

So you choose the way you want to connect.....

-------------
posted_image

Making the World A Louder Place

Posted By: auex
Date Posted: February 09, 2005 at 11:39 PM

LOC sucks compared to pre outs, HP, LP, or otherwise. But it will still work.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: eiknujrac
Date Posted: February 09, 2005 at 11:41 PM

I know, but its a last resort situation, thanks for the help guys!

Print Page | Close Window